The Flat Head's Stand Collar Rider’s Jacket combines a clean, minimal design with an impeccable fit for a unique take on the classic café racer style jacket.
LEATHER: 1.3mm Horsehide
-Veg tanned teacore leather (original brown of hide will show with wear)
-Tanned in Italy's Maryam Tannery
-Oiled and sewn in Japan
-Asymmetrical cross zip design
-Stand collar with snap button closure
-Contrast brown stitching
-Red rayon lining on body and sleeves
-100% iron "uchi-nuki" side-cinch buckles
-Internal chest pocket
-Hip pockets with zippers
-Branded cotton twill pocket bags
-Gusseted ‘action back’ construction
ORIGIN: Made in Japan
The Stand Collar is a slick, stripped-back entry into The Flat Head’s already impressive selection of Rider’s Jackets. It has a cross zip design with a classic café racer style collar. The 1.3mm, veg-tanned horsehide leather is soft, supple, and will break in lightning fast to develop a fit and drape unique to the wearer.
The leather has been tanned at Italy’s legendary Maryam Tannery before being cut, sewn, and oiled in Japan by The Flat Head themselves. It showcases a rich variance of dusty black hues that will lighten to a vintage brown with wear. As is to be expected from The Flat Head’s fabled sewing expertise, the cognac brown stitching is top-notch in its intricacy and provides a beautiful point of contrast to the jacket’s darker leather and brass hardware.
Elliot wears a size 40 jacket in these images. He could equally wear size 42 for a slightly more roomy fit with more room to layer. He is 185cm tall and weighs 74kg / 6ft 1" and 163 lbs.
Important: The best way to determine the size you need is to measure a similar item you already own and compare with the actual sizing as per the table below. Do not go byalone.
FREE UK delivery on orders over £50.
FREE European delivery on orders over €200.
Standard delivery is €30 for European orders under €200
If you are not completely satisfied with your purchase, you can return it to us within 21 days for an exchange or refund.
For more information, please see our Returns & Exchanges page.
Stage 1: Chest
- Measure from pit to pit and double the reading.
Stage 2: Shoulder
>Measure across the top from one shoulder seam to the other.
Stage 3: Waist
We measure the narrowest part of the garment outer seam to outer seam between the pit and the opening. If, however, the shirt has gussets, the waist will correspond to the the opening measurement.
Stage 4: Opening
Here we take a cross measurement from seam to seam at the bottom of the shirt.
Stage 5: Length
Measure from the top of the shoulder by the collar to the bottom of the garment.
Stage 6: Sleeve
Measure from the top of shoulder seam to the cuff’s edge.