Since 1996 The Flat Head have been pushing boundaries in terms of quality of construction and attention to detail. Renowned for their signature denims and flannel shirts, TFH also have a large and well deserved following for their legendary leather jackets. Every aspect has been intensely considered from the sourcing of the Shinki leather to the smallest zip. Perfectly demonstrated here in the stone cold classic single rider's fit in black, teacore leather
LEATHER: 1.3mm horsehide leather
STYLE/FIT: Single Rider's
COLOUR: Black - Teacore
METHOD: Veg-tanned with part aniline finish
DETAILS:
-Classic collar
-Original Universal zip
-Heavy canvas inner pocket bags with printed FH logo (Not visible but that's irrelevant to The Flat Head)
-Inner pocket
-100% Rayon body and sleeve lining - red
ORIGIN: Made in Japan
The Flat Head Rider's jacket with classic collar uses 1.3mm thick equine leather custom made by Japan's Shinki tannery.
The jacket is veg tanned with part aniline finish. Both dye and pigments are combined for durability and to maintain the leather's character.
Elliot wears size 40 jacket. He is 185cm tall and weighs 74kg / 6ft 1" and 163 Lbs.
Important: The best way to determine the size you need is to measure a similar item you already own and compare with the actual sizing as per the table below. Do not go by alone.
| SIZES | 36-S | 38-M | 40-L | 42-XL | 44-XXL |
|---|---|---|---|---|---|
| Chest | 38 | 41 | 43 | 45 | 47 |
| Waist | 18 | 19 | 20 | 21 | 22 |
| Shoulder | 17 | 18.25 | 19 | 20.25 | 21.75 |
| Opening | 18 | 19 | 19.75 | 20.5 | 21.5 |
| Vertical Length | 23.5 | 24.75 | 25.75 | 27 | 28 |
| Sleeve Length | 23.5 | 24.5 | 25.25 | 25.5 | 26.25 |
FREE UK delivery on orders over £50.
Shipping costs £8 to UK addresses for orders under £50.
For international orders, please see our full shipping and delivery details.
FREE European delivery on orders over €200.
Standard delivery is €30 for European orders under €200
For further information, please see our full shipping and delivery details.
FREE delivery worldwide on orders over $200.
Shipping costs $25 for orders under $200
Orders to USA, Canada, Mexico & Far East - 2 working days. (Next working day to NYC).
Australia and New Zealand - 3-4 working days.
For international orders, please see our full shipping and delivery details.
If you are not completely satisfied with your purchase, you can return it to us within 21 days for an exchange or refund.
For more information, please see our Returns & Exchanges page.
Stage 1: The waist
- Button up the jean.
- Lay flat with the top waist band evenly flat on the back waist band.
- Measure from one side to the other keeping the jean flat & double the measurement.
Stage 2: The hip
- Measure 3 inches or 7.5cm from the crotch stitch.
- Measure from side to side flat across the jean at this point.
Stage 3: Front rise
- Lay flat and measure from crotch seam to top of jean with top button fastened
Stage 4: Back rise
- Measure from crotch seam to top of the back of the jean.
Stage 5: Thigh
- Lay flat and measure from crotch across to outside of leg.
Stage 6: Knee
- Lay flat and measure 13” or 33cm from crotch down inside seam of jeans
- From here measure from one side of the jean to the other.
Stage 7: hem width/leg opening
- With the jean flat measure from one side of the leg opening to the other.
- NB with very heavy denim 18oz and above measure the entire circumference of the exterior of the hem using a measuring tape and divide by 2 for a more exact figure.
Stage 8: Inseam/inside leg
- Lay the jean flat with the inseam at the centre.
- Following the inside seam measure from the crotch to the end of the leg.
Stage 1: Chest
- Measure from pit to pit and double the reading.
Stage 2: Shoulder
>Measure across the top from one shoulder seam to the other.
Stage 3: Waist
We measure the narrowest part of the garment outer seam to outer seam between the pit and the opening. If, however, the shirt has gussets, the waist will correspond to the the opening measurement.
Stage 4: Opening
Here we take a cross measurement from seam to seam at the bottom of the shirt.
Stage 5: Length
Measure from the top of the shoulder by the collar to the bottom of the garment.
Stage 6: Sleeve
Measure from the top of shoulder seam to the cuff’s edge.