The 3004 is The Flat Head’s straight leg jean made using their vintage-loomed ‘Pioneer’ denim. These jeans have been one-washed but a small amount of shrinkage is still expected with subsequent washes. Please allow a little wiggle room when sizing, do not size snug.
FABRIC: 14.5oz, 100% cotton selvedge denim
METHOD: Unsanforized but one-washed
-Woven on vintage shuttle looms
-Unsanforized but one-washed
-Flat Head & Co. branded iron buttons
-Hidden copper rivets
-Goat leather patch
-Selvedge cut coin pocket
ORIGIN: Made in Japan
The Flat Head’s 14.5oz ‘Pioneer’ denim is woven on vintage shuttle looms for standout character and a surprisingly soft hand. Both the weave and the dyeing process ensure that the denim will fade with a high-contrast, vertical quality. The Flat Head’s fascination for the aging process is echoed further in the jean’s construction - even the pockets are double stitched so as to fade with some added puckering. In terms of fit, The Flat Head’s The 3004 cut is as classic as it comes: a mid-to-high rise, a roomy thigh, and a straight leg with just a touch of taper from the knee down.
Elliot wears size 31w jeans. He is 185cm tall and weighs 74kg / 6ft 1" and 163 lbs.
Important: The best way to determine the size you need is to measure a similar item you already own and compare with the actual sizing as per the table below. Do not go by tagsize alone. These jeans have been one washed and will stretch out 1" in the waist with wear. There is a little more shrinkage left in the denim so leave a little wiggle room and don't size too snug
FREE UK delivery on orders over £50.
FREE European delivery on orders over €200.
Standard delivery is €30 for European orders under €200
If you are not completely satisfied with your purchase, you can return it to us within 21 days for an exchange or refund.
For more information, please see our Returns & Exchanges page.
Stage 1: Chest
- Measure from pit to pit and double the reading.
Stage 2: Shoulder
>Measure across the top from one shoulder seam to the other.
Stage 3: Waist
We measure the narrowest part of the garment outer seam to outer seam between the pit and the opening. If, however, the shirt has gussets, the waist will correspond to the the opening measurement.
Stage 4: Opening
Here we take a cross measurement from seam to seam at the bottom of the shirt.
Stage 5: Length
Measure from the top of the shoulder by the collar to the bottom of the garment.
Stage 6: Sleeve
Measure from the top of shoulder seam to the cuff’s edge.