The 3004 is The Flat Head’s straight leg jean made using their vintage-loomed ‘Pioneer’ denim.These jeans have been one-washed but a small amount of shrinkage is still expected with subsequent washes. Please allow a little wiggle room when sizing, do not size snug.
FABRIC: 14.5oz, 100% cotton selvedge denim STYLE/FIT: Straight COLOUR: Indigo METHOD: Unsanforized but one-washed DETAILS: -Woven on vintage shuttle looms -Unsanforized but one-washed -Mid-to-high rise -Flat Head & Co. branded iron buttons -Hidden copper rivets -Button fly -Goat leather patch -Selvedge cut coin pocket ORIGIN: Made in Japan
The Flat Head’s 14.5oz ‘Pioneer’ denim is woven on vintage shuttle looms for standout character and a surprisingly soft hand. Both the weave and the dyeing process ensure that the denim will fade with a high-contrast, vertical quality. The Flat Head’s fascination for the aging process is echoed further in the jean’s construction - even the pockets are double stitched so as to fade with some added puckering. In terms of fit, The Flat Head’s The 3004 cut is as classic as it comes: a mid-to-high rise, a roomy thigh, and a straight leg with just a touch of taper from the knee down.
Elliot wears size 31w jeans. He is 185cm tall and weighs 74kg / 6ft 1" and 163 lbs.
Important: The best way to determine the size you need is to measure a similar item you already own and compare with the actual sizing as per the table below. Do not go by tagsize alone. These jeans have been one washed. There is a little more shrinkage left in the denim so leave a little wiggle room and don't size too snug
Button up the jean. Lay flat with the top waist band evenly flat on the back waist band. Measure from one side to the other keeping the jean flat & double the measurement.
Stage 2: The hip
Measure 3 inches or 7.5cm from the crotch stitch. Measure from side to side flat across the jean at this point.
Stage 3: Front rise
Lay flat and measure from crotch seam to top of jean with top button fastened
Stage 4: Back rise
Measure from crotch seam to top of the back of the jean.
Stage 5: Thigh
Lay flat and measure from crotch across to outside of leg.
Stage 6: Knee
Lay flat and measure 13” or 33cm from crotch down inside seam of jeans From here measure from one side of the jean to the other.
Stage 7: hem width/leg opening
With the jean flat measure from one side of the leg opening to the other. NB with very heavy denim 18oz and above measure the entire circumference of the exterior of the hem using a measuring tape and divide by 2 for a more exact figure.
Stage 8: Inseam/inside leg
Lay the jean flat with the inseam at the centre. Following the inside seam measure from the crotch to the end of the leg.
Stage 1: Chest
Measure from pit to pit and double the reading.
Stage 2: Shoulder
Measure across the top from one shoulder seam to the other.
Stage 3: Waist We measure the narrowest part of the garment outer seam to outer seam between the pit and the opening. If, however, the shirt has gussets, the waist will correspond to the the opening measurement.
Stage 4: Opening Here we take a cross measurement from seam to seam at the bottom of the shirt. Stage 5: Length Measure from the top of the shoulder by the collar to the bottom of the garment. Stage 6: Sleeve Measure from the top of shoulder seam to the cuff’s edge.
FREE European delivery on orders over €200.
Standard delivery is €30 for European orders under €200.
United States shop