Viberg Service Boot - Rawhide Waxy Commander - 2040
In stock
£795.00
Viberg’s iconic Service Boot in a special, Waxy Commander leather from the C.F. Stead Tannery in Leeds.
LEATHER: C.F. Stead Waxy Commander (UK) STYLE/FIT: Service Boot COLOUR: Brown DETAILS: -2040 last -Unlined upper -8 AA antique brass eyelets -Natural finish -Black Commando sole -Stitchdown construction -Partially gusseted tongue -Leather toe puff ORIGIN: Made in Canada
The Service Boot is an updated interpretation of Viberg's original work boot, designed by founder Edwin Viberg in 1931. A similar pattern was used by multiple nations as a standard issue military boot during WWII.
Viberg have taken this iconic design and decked it out in a Waxy Commander leather from the UK’s C.F. Stead Tannery. This is a rugged and reliable leather that’s undergone a special curing method to shrink and tighten the fibres of the hide. This results in a durable, water-resistant, and above all beautiful leather. It has a waxy hand and a high pull-up that will develop some exceptional character down the line. The boot’s Stitchdown construction guarantees a long and resoleable life.
Viberg boots are the end result of numerous hand-finished processes - from the tanning of the rare leathers to the free-hand trimming of the soles. They undergo strict quality inspections at Viberg's Victoria workshop and upon arrival here at Rivet & Hide. Any slight variations in colour and texture should therefore be considered a part of the Service Boot’s unique character.
NB: The size you order will be the size stamped in the boots. Viberg fits more closely to UK rather than US sizing so please take this into account when making your choice. If you need any assistance with sizing, please reach out to us via email, we are always happy to help.
Button up the jean. Lay flat with the top waist band evenly flat on the back waist band. Measure from one side to the other keeping the jean flat & double the measurement.
Stage 2: The hip
Measure 3 inches or 7.5cm from the crotch stitch. Measure from side to side flat across the jean at this point.
Stage 3: Front rise
Lay flat and measure from crotch seam to top of jean with top button fastened
Stage 4: Back rise
Measure from crotch seam to top of the back of the jean.
Stage 5: Thigh
Lay flat and measure from crotch across to outside of leg.
Stage 6: Knee
Lay flat and measure 13” or 33cm from crotch down inside seam of jeans From here measure from one side of the jean to the other.
Stage 7: hem width/leg opening
With the jean flat measure from one side of the leg opening to the other. NB with very heavy denim 18oz and above measure the entire circumference of the exterior of the hem using a measuring tape and divide by 2 for a more exact figure.
Stage 8: Inseam/inside leg
Lay the jean flat with the inseam at the centre. Following the inside seam measure from the crotch to the end of the leg.
Stage 1: Chest
Measure from pit to pit and double the reading.
Stage 2: Shoulder
Measure across the top from one shoulder seam to the other.
Stage 3: Waist We measure the narrowest part of the garment outer seam to outer seam between the pit and the opening. If, however, the shirt has gussets, the waist will correspond to the the opening measurement.
Stage 4: Opening Here we take a cross measurement from seam to seam at the bottom of the shirt. Stage 5: Length Measure from the top of the shoulder by the collar to the bottom of the garment. Stage 6: Sleeve Measure from the top of shoulder seam to the cuff’s edge.
FREE UK delivery on orders over £50.
Shipping costs £8 to UK addresses for orders under £50.
United States shop