Rogue Territory Fatigue Pants - Black Herringbone
In stock
Rogue Territory’s take on the classic fatigue pant, crafted in a 10oz Japanese herringbone twill.
FABRIC: 10oz, 100% cotton
STYLE/FIT: Straight
COLOR: Black
DETAILS:
-Japanese herringbone twill
-Front pockets with signature gusset design
-Patch back pockets with flaps
-Double-felled inseam for durability
-Japanese-made urea buttons
-Sewn in Los Angeles
ORIGIN: Made in USA
Rogue Territory nails this clean, minimal take on the OG fatigue pant. Cut from all-black Japanese herringbone, it features gusseted utility pockets up front, patch pockets in the rear, and Japanese urea buttons throughout. A high rise and relaxed, straight-leg fit offer comfort, while a subtle taper at the hem adds a tailored edge. Finished with a fully felled inseam for impeccable durability.
Elliot wears size 29 trousers. He is 185cm tall and weighs 74kg / 6ft 1" and 163 lbs.
mportant: The best way to determine the size you need is to measure a similar item you already own and compare with the actual sizing as per the table below. Do not go by tagsize alone. Shrinkage is minimal.
| INCHES | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 38 |
|---|---|---|---|---|---|---|---|---|
| Waist | 31 | 33 | 33.5 | 34 | 35 | 36 | 37 | 40 |
| Hip | 21 | 21.75 | 22 | 22.5 | 23 | 23.5 | 23.75 | 24.5 |
| Front Rise | 13.5 | 14 | 14 | 14.25 | 14.25 | 14.75 | 14.75 | 15 |
| Back Rise | 15.5 | 15.75 | 16 | 16.25 | 16.5 | 17 | 17.25 | 17.5 |
| Upper Thigh | 12 | 12.25 | 12.5 | 12.75 | 13 | 13.25 | 13.5 | 14 |
| Knee | 8.75 | 9 | 9.25 | 9.5 | 9.75 | 10 | 10 | 10.25 |
| Leg Opening | 8 | 8.25 | 8.5 | 8.75 | 9 | 9 | 9.25 | 9.5 |
| Inseam | 32 | 32 | 32.5 | 32.5 | 32.5 | 32.5 | 32.5 | 33 |
Stage 1: The waist
- Button up the jean.
Lay flat with the top waist band evenly flat on the back waist band.
Measure from one side to the other keeping the jean flat & double the measurement.
Stage 2: The hip
- Measure 3 inches or 7.5cm from the crotch stitch.
Measure from side to side flat across the jean at this point.
Stage 3: Front rise
- Lay flat and measure from crotch seam to top of jean with top button fastened
Stage 4: Back rise
- Measure from crotch seam to top of the back of the jean.
Stage 5: Thigh
- Lay flat and measure from crotch across to outside of leg.
Stage 6: Knee
- Lay flat and measure 13” or 33cm from crotch down inside seam of jeans
From here measure from one side of the jean to the other.
Stage 7: hem width/leg opening
- With the jean flat measure from one side of the leg opening to the other.
NB with very heavy denim 18oz and above measure the entire circumference of the exterior of the hem using a measuring tape and divide by 2 for a more exact figure.
Stage 8: Inseam/inside leg
- Lay the jean flat with the inseam at the centre.
Following the inside seam measure from the crotch to the end of the leg.
Stage 1: Chest
- Measure from pit to pit and double the reading.
Stage 2: Shoulder
- Measure across the top from one shoulder seam to the other.
Stage 3: Waist
We measure the narrowest part of the garment outer seam to outer seam between the pit and the opening. If, however, the shirt has gussets, the waist will correspond to the the opening measurement.
Stage 4: Opening
Here we take a cross measurement from seam to seam at the bottom of the shirt.
Stage 5: Length
Measure from the top of the shoulder by the collar to the bottom of the garment.
Stage 6: Sleeve
Measure from the top of shoulder seam to the cuff’s edge.
FREE UK delivery on orders over £50.
Shipping costs £8 to UK addresses for orders under £50.
For international orders, please see our full shipping and delivery details.
If you are not completely satisfied with your purchase, you can return it to us within 21 days for an exchange or refund.
For more information, please see our Returns & Exchanges page.