Iron Heart 9oz Selvedge Indigo Check Western Flannel - Black
In stock
£327.00
Iron Heart’s 9oz selvedge flannel Western is a lighter-weight alternative to their signature Ultra Heavy Flannel. These unbrushed shirts use a mixture of rope dyeing and sulphur dyeing techniques to create a check pattern that will fade at different speeds and to different degrees with wear.
FABRIC: 9oz, 100% cotton unbrushed selvedge flannel STYLE/FIT: Slim COLOUR: Indigo METHOD: One-washed DETAILS: -IHSH-411-BLK -Western style -Indigo & sulphur cheese-dyed warp and weft -Made to fade with wear and washing -Tonal stitching and bar tacks -Black YKK snaps -Button at the collar -Western-style flap patch pockets with snap fastenings -Single, double, and triple needle stitch construction -Western-style front and back yokes -Felled internal seams -Selvedge placket and cuff ID -Red bobbin thread One-washed—no shrinkage expected ORIGIN: Made in Japan
Iron Heart’s 9oz selvedge flannels get their unique colours through a blend of dyeing processes. The darkest yarns in the pattern are indigo-dyed, while the lighter shades are sulphur cheese-dyed. This creates a flannel with deep, nuanced shades of indigo that will fade naturally over time.
The check pattern itself is a labour of love. It’s slowly woven on the only four shuttle looms in Japan capable of producing this intricate design. The slower weave also imparts greater heft and texture. The shirts are left unbrushed for a touch more structure while keeping things breathable.
Please Note: Iron Heart refers to this plaid as a “black check” to differentiate this colorway from their pure indigo shirts. The dominant colour here is a deep indigo, which will gradually lighten with wear and washing.
Alex wears a size Large shirt. He is 182cm tall and weighs 78kg / 6ft and 172 lbs.
Important: The best way to determine the size you need is to measure a similar item you already own and compare with the actual sizing as per the table below. Do not go by tagsize alone.
Button up the jean. Lay flat with the top waist band evenly flat on the back waist band. Measure from one side to the other keeping the jean flat & double the measurement.
Stage 2: The hip
Measure 3 inches or 7.5cm from the crotch stitch. Measure from side to side flat across the jean at this point.
Stage 3: Front rise
Lay flat and measure from crotch seam to top of jean with top button fastened
Stage 4: Back rise
Measure from crotch seam to top of the back of the jean.
Stage 5: Thigh
Lay flat and measure from crotch across to outside of leg.
Stage 6: Knee
Lay flat and measure 13” or 33cm from crotch down inside seam of jeans From here measure from one side of the jean to the other.
Stage 7: hem width/leg opening
With the jean flat measure from one side of the leg opening to the other. NB with very heavy denim 18oz and above measure the entire circumference of the exterior of the hem using a measuring tape and divide by 2 for a more exact figure.
Stage 8: Inseam/inside leg
Lay the jean flat with the inseam at the centre. Following the inside seam measure from the crotch to the end of the leg.
Stage 1: Chest
Measure from pit to pit and double the reading.
Stage 2: Shoulder
Measure across the top from one shoulder seam to the other.
Stage 3: Waist We measure the narrowest part of the garment outer seam to outer seam between the pit and the opening. If, however, the shirt has gussets, the waist will correspond to the the opening measurement.
Stage 4: Opening Here we take a cross measurement from seam to seam at the bottom of the shirt. Stage 5: Length Measure from the top of the shoulder by the collar to the bottom of the garment. Stage 6: Sleeve Measure from the top of shoulder seam to the cuff’s edge.
FREE UK delivery on orders over £50.
Shipping costs £8 to UK addresses for orders under £50.
