Handson Grip Merino Wool Hobo Glove - Grey Melange

In stock

The Handson Grip Hobo Glove’s minimal design and lightweight built make it the perfect daily carry for those colder days.

FABRIC: Merino wool 
COLOUR: Grey 
DETAILS:  
-Touchscreen compatible 
ORIGIN: Made in Japan  

The Hobo Glove's Merino wool construction creates a warm and breathable glove with excellent natural anti-bacterial and anti-fungal properties. The wool is fine enough to wear as a liner in tandem with a heavy-duty performance glove if needed, but is also warm and insulating enough to wear solo. The thumb and forefinger come equipped with touchscreen friendly tips, so you can wear these without compromising the daily scroll. The Hobo also comes with an extended cuff for added protection against wind and rain.


Stage 1: The waist

  • Button up the jean.
    Lay flat with the top waist band evenly flat on the back waist band.
    Measure from one side to the other keeping the jean flat & double the measurement.


Stage 2: The hip

  • Measure 3 inches or 7.5cm from the crotch stitch.
    Measure from side to side flat across the jean at this point.


Stage 3: Front rise

  • Lay flat and measure from crotch seam to top of jean with top button fastened


Stage 4: Back rise

  • Measure from crotch seam to top of the back of the jean.


Stage 5: Thigh

  • Lay flat and measure from crotch across to outside of leg.

Stage 6: Knee

  • Lay flat and measure 13” or 33cm from crotch down inside seam of jeans
    From here measure from one side of the jean to the other.

Stage 7: hem width/leg opening

  • With the jean flat measure from one side of the leg opening to the other.
    NB with very heavy denim 18oz and above measure the entire circumference of the exterior of the hem using a measuring tape and divide by 2 for a more exact figure.


Stage 8: Inseam/inside leg

  • Lay the jean flat with the inseam at the centre.
    Following the inside seam measure from the crotch to the end of the leg.

Stage 1: Chest

  • Measure from pit to pit and double the reading.


Stage 2: Shoulder

  • Measure across the top from one shoulder seam to the other.


Stage 3: Waist
We measure the narrowest part of the garment outer seam to outer seam between the pit and the opening. If, however, the shirt has gussets, the waist will correspond to the the opening measurement.


Stage 4: Opening
Here we take a cross measurement from seam to seam at the bottom of the shirt.

Stage 5: Length
Measure from the top of the shoulder by the collar to the bottom of the garment.

Stage 6: Sleeve
Measure from the top of shoulder seam to the cuff’s edge.

FREE UK delivery on orders over £50.

Shipping costs £8 to UK addresses for orders under £50.

For international orders, please see our full shipping and delivery details.

If you are not completely satisfied with your purchase, you can return it to us within 21 days for an exchange or refund. 

For more information, please see our Returns & Exchanges page.