Rogue Territory Field Work Shirt - Raspberry Plaid
In stock
The Field Shirt is Rogue Territory’s riff on the traditional work shirt, defined by its tailored but generous fit and large, button down chest pockets.
FABRIC: 8oz, 100% cotton flannel
STYLE/FIT: Slim/regular
COLOUR: Raspberry
DETAILS:
-Custom Japanese cotton flannel
-Workshirt silhouette
-Two flap chest pockets
-Natural herringbone locker loop
-Japanese urea buttons
-Triple needle chain stitch seams with runoff detail
ORIGIN: Made in USA
PLEASE NOTE THAT ALL OUTLET ITEMS ARE FINAL AND NON-RETURNABLE
This inspired nod to the classic work shirt is cut from a soft and textured, 8oz Japanese plaid flannel in raspberry plaid. Two large chest pockets and a robust, triple needle chainstitch construction both make good on the shirt’s more rugged foundations. The cut here is slim without being tight, allowing for a comfortable and flattering fit with a pleasing, effortless drape. Finished with gusseted side seams and a run-off triple chain stitch detail.
Elliot wears a size Medium shirt. He is 185cm tall and weighs 78kg / 6ft 1" and 163 lbs.
Important: The best way to determine the size you need is to measure a similar item you already own and compare with the actual sizing as per the table below. Do not go by tagsize alone.
| SIZES | S | M | L | XL | XXL |
|---|---|---|---|---|---|
| Chest | 41 | 43 | 45 | 48 | 51 |
| Waist | 19.75 | 20.5 | 21.5 | 23.75 | 24.25 |
| Shoulder width | 16.75 | 17.5 | 18 | 19 | 19.5 |
| Opening | 20 | 21 | 22 | 23 | 24.5 |
| Vertical Length | 27.5 | 28.25 | 28.75 | 29.75 | 31 |
| Sleeve Length | 25.75 | 26 | 26.5 | 27 | 27.75 |
Stage 1: The waist
- Button up the jean.
Lay flat with the top waist band evenly flat on the back waist band.
Measure from one side to the other keeping the jean flat & double the measurement.
Stage 2: The hip
- Measure 3 inches or 7.5cm from the crotch stitch.
Measure from side to side flat across the jean at this point.
Stage 3: Front rise
- Lay flat and measure from crotch seam to top of jean with top button fastened
Stage 4: Back rise
- Measure from crotch seam to top of the back of the jean.
Stage 5: Thigh
- Lay flat and measure from crotch across to outside of leg.
Stage 6: Knee
- Lay flat and measure 13” or 33cm from crotch down inside seam of jeans
From here measure from one side of the jean to the other.
Stage 7: hem width/leg opening
- With the jean flat measure from one side of the leg opening to the other.
NB with very heavy denim 18oz and above measure the entire circumference of the exterior of the hem using a measuring tape and divide by 2 for a more exact figure.
Stage 8: Inseam/inside leg
- Lay the jean flat with the inseam at the centre.
Following the inside seam measure from the crotch to the end of the leg.
Stage 1: Chest
- Measure from pit to pit and double the reading.
Stage 2: Shoulder
- Measure across the top from one shoulder seam to the other.
Stage 3: Waist
We measure the narrowest part of the garment outer seam to outer seam between the pit and the opening. If, however, the shirt has gussets, the waist will correspond to the the opening measurement.
Stage 4: Opening
Here we take a cross measurement from seam to seam at the bottom of the shirt.
Stage 5: Length
Measure from the top of the shoulder by the collar to the bottom of the garment.
Stage 6: Sleeve
Measure from the top of shoulder seam to the cuff’s edge.
FREE UK delivery on orders over £50.
Shipping costs £8 to UK addresses for orders under £50.
For international orders, please see our full shipping and delivery details.
If you are not completely satisfied with your purchase, you can return it to us within 21 days for an exchange or refund.
For more information, please see our Returns & Exchanges page.