Studio D’Artisan’s G3 selvedge denim Type II combines a classic silhouette with a special “kurozome” garment dyed treatment.
FABRIC: 14oz, 100% cotton selvedge denim
STYLE/FIT: Regular
COLOUR: Black
METHOD: One-washed
DETAILS:
-G3 Toyoda-loomed indigo selvedge denim
-Garment-dyed by Kyoto Montsuki over an indigo dyed base
-Type II silhouette
-Knife pleats
-2 chest pockets
-Copper buttons
-One-washed, no shrinkage expected
-Gilded black leather patch
-Adjustable sides
ORIGIN: Made in Japan
Studio D’Artisan’s Type II Trucker is woven on G3 Toyoda looms - Japan’s oldest operational shuttle looms. All the classic trappings of a good Type II are present and correct: boxier fit, a slightly cropped body, knife-pleated front. This particular version has been garment-dyed natural black at Kyoto Montsuki - a century-old dye house situated in Mubi. The slow, hand layering of natural dyes - derived from betel nuts - creates a blacker-than-black finish that will no doubt age beautifully whilst the base layer of indigo fades away to create a black finish with some unique depth and tonality.
Carlo wears size 40 jacket. He is 185 cm and 78 kg / 6ft 1" and 172 lbs.
Important: The best way to determine the size you need is to measure a similar item you already own and compare with the actual sizing as per the table below. Do not go by tagsize alone.
| SIZES | 38 | 40 | 42 | 44 | 46 |
|---|---|---|---|---|---|
| Chest | 42 | 44 | 47 | 49 | 50 |
| Waist | 20.5 | 21 | 22.75 | 23.25 | 24 |
| Shoulder width | 17.5 | 18.25 | 18.5 | 19.5 | 20 |
| Opening | 19 | 19.5 | 20.5 | 21.5 | 22.25 |
| Vertical Length | 24.25 | 25 | 25.75 | 26.5 | 26.5 |
| Sleeve Length | 24 | 25 | 25.5 | 25.75 | 26 |
FREE UK delivery on orders over £50.
Shipping costs £8 to UK addresses for orders under £50.
For international orders, please see our full shipping and delivery details.
FREE European delivery on orders over €200.
Standard delivery is €30 for European orders under €200
For further information, please see our full shipping and delivery details.
FREE delivery worldwide on orders over $200.
Shipping costs $25 for orders under $200
Orders to USA, Canada, Mexico & Far East - 2 working days. (Next working day to NYC).
Australia and New Zealand - 3-4 working days.
For international orders, please see our full shipping and delivery details.
If you are not completely satisfied with your purchase, you can return it to us within 21 days for an exchange or refund.
For more information, please see our Returns & Exchanges page.
Stage 1: The waist
- Button up the jean.
- Lay flat with the top waist band evenly flat on the back waist band.
- Measure from one side to the other keeping the jean flat & double the measurement.
Stage 2: The hip
- Measure 3 inches or 7.5cm from the crotch stitch.
- Measure from side to side flat across the jean at this point.
Stage 3: Front rise
- Lay flat and measure from crotch seam to top of jean with top button fastened
Stage 4: Back rise
- Measure from crotch seam to top of the back of the jean.
Stage 5: Thigh
- Lay flat and measure from crotch across to outside of leg.
Stage 6: Knee
- Lay flat and measure 13” or 33cm from crotch down inside seam of jeans
- From here measure from one side of the jean to the other.
Stage 7: hem width/leg opening
- With the jean flat measure from one side of the leg opening to the other.
- NB with very heavy denim 18oz and above measure the entire circumference of the exterior of the hem using a measuring tape and divide by 2 for a more exact figure.
Stage 8: Inseam/inside leg
- Lay the jean flat with the inseam at the centre.
- Following the inside seam measure from the crotch to the end of the leg.
Stage 1: Chest
- Measure from pit to pit and double the reading.
Stage 2: Shoulder
>Measure across the top from one shoulder seam to the other.
Stage 3: Waist
We measure the narrowest part of the garment outer seam to outer seam between the pit and the opening. If, however, the shirt has gussets, the waist will correspond to the the opening measurement.
Stage 4: Opening
Here we take a cross measurement from seam to seam at the bottom of the shirt.
Stage 5: Length
Measure from the top of the shoulder by the collar to the bottom of the garment.
Stage 6: Sleeve
Measure from the top of shoulder seam to the cuff’s edge.