The Work Pant from 3sixteen is a higher-rise, wider-leg style in a mid-weight, structured chino twill.
FABRIC: 100% cotton chino twill STYLE/FIT: Straight COLOUR: Espresso METHOD: Washed DETAILS: -Mid-to-high rise -Chino twill fabric -Corozo buttons -Rear welt pockets ORIGIN: Made in USA
A work pant-inspired trouser from 3sixteen. Cut from a structured yet drapey, 100% cotton chino cloth, then rinsed to showcase the fabric’s pronounced twill weave. Simple, rugged, and endlessly wearable, the Work Pant has a generously wide leg with a true-hip-sitting, mid-to-high rise. Double-needle flat-felled seam construction reinforces the pant’s hardier, workwear credentials—this is a trouser that can be worn hard. Topped off with natural corozo nut buttons in a tonal finish.
Elliot wears size 29 trouser. He is 185cm tall and weighs 80kg / 6ft 1" and 176 lbs.
Important: The best way to determine the size you need is to measure a similar item you already own and compare with the actual sizing as per the table below. Do not go by tagsize alone.
Button up the jean. Lay flat with the top waist band evenly flat on the back waist band. Measure from one side to the other keeping the jean flat & double the measurement.
Stage 2: The hip
Measure 3 inches or 7.5cm from the crotch stitch. Measure from side to side flat across the jean at this point.
Stage 3: Front rise
Lay flat and measure from crotch seam to top of jean with top button fastened
Stage 4: Back rise
Measure from crotch seam to top of the back of the jean.
Stage 5: Thigh
Lay flat and measure from crotch across to outside of leg.
Stage 6: Knee
Lay flat and measure 13” or 33cm from crotch down inside seam of jeans From here measure from one side of the jean to the other.
Stage 7: hem width/leg opening
With the jean flat measure from one side of the leg opening to the other. NB with very heavy denim 18oz and above measure the entire circumference of the exterior of the hem using a measuring tape and divide by 2 for a more exact figure.
Stage 8: Inseam/inside leg
Lay the jean flat with the inseam at the centre. Following the inside seam measure from the crotch to the end of the leg.
Stage 1: Chest
Measure from pit to pit and double the reading.
Stage 2: Shoulder
Measure across the top from one shoulder seam to the other.
Stage 3: Waist We measure the narrowest part of the garment outer seam to outer seam between the pit and the opening. If, however, the shirt has gussets, the waist will correspond to the the opening measurement.
Stage 4: Opening Here we take a cross measurement from seam to seam at the bottom of the shirt. Stage 5: Length Measure from the top of the shoulder by the collar to the bottom of the garment. Stage 6: Sleeve Measure from the top of shoulder seam to the cuff’s edge.
FREE delivery worldwide on orders over $200.
Shipping costs $25 for orders under $200
Orders to USA, Canada, Mexico & Far East - 2 working days. (Next working day to NYC).
