3sixteen come through with a vintage-style, straight leg cut with a high rise and a little more room in the top block. Cut from a custom-woven Kibata selvedge denim.
FABRIC: 14oz double redline selvedge denim STYLE/FIT: Classic straight COLOUR: Indigo METHOD: Washed DETAILS: -Unsanforized but one-washed to eliminate shrinkage -Custom gunmetal shanks and rivets -Selvedge fly & coin pocket -Double redline selvedge ID -Button fly -Roughout leather patch by Tanner Goods -Chain stitched hem ORIGIN: Made in USA
The CS fit offers a high rise and a classic, straight leg fit (with a very slight taper below the knee). The same room in the top block as the CT fit but with a less pronounced taper. The Kibata selvedge denim used on these jeans has been woven at low tension to create a textured, almost fuzzy hand that will yield beautiful fades with a little wear. The jeans have been rinsed to eliminate shrinkage and to bring the texture and character of the fabric to the fore.
Model is wearing 31w jeans. He is 185 cm tall and weighs 78 kg. / 6ft 1" and 172 lbs.
Important: The best way to determine the size you need is to measure a similar item you already own and compare with the actual sizing as per the table below. Do not go by tagsize alone. Sanforized. Minimal shrinkage.
Button up the jean. Lay flat with the top waist band evenly flat on the back waist band. Measure from one side to the other keeping the jean flat & double the measurement.
Stage 2: The hip
Measure 3 inches or 7.5cm from the crotch stitch. Measure from side to side flat across the jean at this point.
Stage 3: Front rise
Lay flat and measure from crotch seam to top of jean with top button fastened
Stage 4: Back rise
Measure from crotch seam to top of the back of the jean.
Stage 5: Thigh
Lay flat and measure from crotch across to outside of leg.
Stage 6: Knee
Lay flat and measure 13” or 33cm from crotch down inside seam of jeans From here measure from one side of the jean to the other.
Stage 7: hem width/leg opening
With the jean flat measure from one side of the leg opening to the other. NB with very heavy denim 18oz and above measure the entire circumference of the exterior of the hem using a measuring tape and divide by 2 for a more exact figure.
Stage 8: Inseam/inside leg
Lay the jean flat with the inseam at the centre. Following the inside seam measure from the crotch to the end of the leg.
Stage 1: Chest
Measure from pit to pit and double the reading.
Stage 2: Shoulder
Measure across the top from one shoulder seam to the other.
Stage 3: Waist We measure the narrowest part of the garment outer seam to outer seam between the pit and the opening. If, however, the shirt has gussets, the waist will correspond to the the opening measurement.
Stage 4: Opening Here we take a cross measurement from seam to seam at the bottom of the shirt. Stage 5: Length Measure from the top of the shoulder by the collar to the bottom of the garment. Stage 6: Sleeve Measure from the top of shoulder seam to the cuff’s edge.
FREE delivery worldwide on orders over $200.
Shipping costs $25 for orders under $200
Orders to USA, Canada, Mexico & Far East - 2 working days. (Next working day to NYC).
