The Flat Head x R&H Burlington Work Flannel - Wine
In stock
€329.00
Over the last two decades, The Flat Head have earned a reputation for the quality of their custom flannel weaves. What better way to celebrate our move to Mayfair than with an exclusive “Burlington” Work Shirt Flannel?
FABRIC: 100% cotton selvedge flannel STYLE/FIT: Slim/regular COLOUR: Wine METHOD: Washed DETAILS: -Exclusive R&H flannel fabric -Shuttle-loomed selvedge flannel -Double-brushed interior -Felled seam construction on body -Handsewn urea buttons -Two button-down chest pockets ORIGIN: Made in Japan
The Flat Head’s flannel shirts have become a year-on-year favourite for a decade at the shop. We can think of no more poetic a way to commemorate our ten years at Windmill Street — or our upcoming move to Mayfair — than with our very own “Burlington” herringbone flannel. These limited colourways are cut from a shuttle-loomed selvedge flannel in a herringbone weave. The fabric’s interior is double-brushed to ensure a luxurious softness, plenty of warmth, and added insulation. As for the fit, The Flat Head’s house style sits on the more tailored side of a regular cut—striking an expert balance between rugged and refined.
Elliot wears a size Large (40) shirt. He is 185cm tall and weighs 74kg / 6ft 1" and 163 lbs.
Important: The best way to determine the size you need is to measure a similar item you already own and compare with the actual sizing as per the table below. Do not go by tagsize alone.
Button up the jean. Lay flat with the top waist band evenly flat on the back waist band. Measure from one side to the other keeping the jean flat & double the measurement.
Stage 2: The hip
Measure 3 inches or 7.5cm from the crotch stitch. Measure from side to side flat across the jean at this point.
Stage 3: Front rise
Lay flat and measure from crotch seam to top of jean with top button fastened
Stage 4: Back rise
Measure from crotch seam to top of the back of the jean.
Stage 5: Thigh
Lay flat and measure from crotch across to outside of leg.
Stage 6: Knee
Lay flat and measure 13” or 33cm from crotch down inside seam of jeans From here measure from one side of the jean to the other.
Stage 7: hem width/leg opening
With the jean flat measure from one side of the leg opening to the other. NB with very heavy denim 18oz and above measure the entire circumference of the exterior of the hem using a measuring tape and divide by 2 for a more exact figure.
Stage 8: Inseam/inside leg
Lay the jean flat with the inseam at the centre. Following the inside seam measure from the crotch to the end of the leg.
Stage 1: Chest
Measure from pit to pit and double the reading.
Stage 2: Shoulder
Measure across the top from one shoulder seam to the other.
Stage 3: Waist We measure the narrowest part of the garment outer seam to outer seam between the pit and the opening. If, however, the shirt has gussets, the waist will correspond to the the opening measurement.
Stage 4: Opening Here we take a cross measurement from seam to seam at the bottom of the shirt. Stage 5: Length Measure from the top of the shoulder by the collar to the bottom of the garment. Stage 6: Sleeve Measure from the top of shoulder seam to the cuff’s edge.
FREE European delivery on orders over €200.
Standard delivery is €30 for European orders under €200.
