Samurai Heavyweight Back Satin Baker Pants - Olive
Out of stock
€295.00
The SJ52BP Baker Pant from Samurai combines classic milirary style with a heavyweight, densely textured selvedge back satin fabric.
FABRIC: 15oz, 100% cotton selvedge back satin STYLE/FIT: Straight COLOUR: Olive METHOD: One-washed DETAILS: -Mid-to-high rise -Selvedge back satin crepe fabric -Sulphur-dyed -Front patch pockets -Rear flap utility pockets -Iron buttons -Silver lamé selvedge ID -One-washed, no further shrinkage expected ORIGIN: Made in Japan
Samurai’s Baker Pant is a heavyweight homage to the OG-107 Army fatigues worn by US forces from the ‘50s to the late ’80s. Not too wide and not too slim, the Baker Pant nails that classic, high-rise silhouette with ample room through the leg.
The fabric is a 15oz selvedge back satin crepe—sulphur-dyed and made to fade beautifully. You can expect stunning, denim-adjacent aging as the dye gradually breaks away from the cloth with wear. It’s rare to see a satin crepe with this much structure, texture, and charm—so Samurai has created something special here.
Further flourishes include branded iron donut-cut buttons and Samurai’s signature silver lamé selvedge ID.
A note on washing: Samurai's Baker Pants are sulphur-dyed and may develop some marbling when washed. This is normal and will gradually even out with subsequent washes. To minimize marbling, we recommend that you wash your Baker Pants inside out on a delicate, cold cycle. Remove them from the wash immediately after the cycle finishes and hang dry.
Elliot wears size 30 trouser. He is 185cm tall and weighs 80kg / 6ft 1" and 176 lbs.
Important: The best way to determine the size you need is to measure a similar item you already own and compare with the actual sizing as per the table below. Do not go by tagsize alone. Unsanforized but one-washed.
Button up the jean. Lay flat with the top waist band evenly flat on the back waist band. Measure from one side to the other keeping the jean flat & double the measurement.
Stage 2: The hip
Measure 3 inches or 7.5cm from the crotch stitch. Measure from side to side flat across the jean at this point.
Stage 3: Front rise
Lay flat and measure from crotch seam to top of jean with top button fastened
Stage 4: Back rise
Measure from crotch seam to top of the back of the jean.
Stage 5: Thigh
Lay flat and measure from crotch across to outside of leg.
Stage 6: Knee
Lay flat and measure 13” or 33cm from crotch down inside seam of jeans From here measure from one side of the jean to the other.
Stage 7: hem width/leg opening
With the jean flat measure from one side of the leg opening to the other. NB with very heavy denim 18oz and above measure the entire circumference of the exterior of the hem using a measuring tape and divide by 2 for a more exact figure.
Stage 8: Inseam/inside leg
Lay the jean flat with the inseam at the centre. Following the inside seam measure from the crotch to the end of the leg.
Stage 1: Chest
Measure from pit to pit and double the reading.
Stage 2: Shoulder
Measure across the top from one shoulder seam to the other.
Stage 3: Waist We measure the narrowest part of the garment outer seam to outer seam between the pit and the opening. If, however, the shirt has gussets, the waist will correspond to the the opening measurement.
Stage 4: Opening Here we take a cross measurement from seam to seam at the bottom of the shirt. Stage 5: Length Measure from the top of the shoulder by the collar to the bottom of the garment. Stage 6: Sleeve Measure from the top of shoulder seam to the cuff’s edge.
FREE European delivery on orders over €200.
Standard delivery is €30 for European orders under €200.
United States shop