Iron Heart 12oz Heavy Cotton Regular Fit Chinos - Khaki
In stock
€365.00
Iron Heart come through with a casual, regular fit chino made from a heavyweight but silky soft 12oz Japanese cotton twill cloth.
FABRIC: 12oz Japanese cotton chino cloth STYLE/FIT: Regular COLOUR: Khaki DETAILS: -IH-730-KHA -Medium rise -Zipper fly with hook closure -Two twill lined rear pockets, one with button closure -Coin pocket below waistband -Embroidered rear patch -One-washed so little or no shrinkage ORIGIN: Made in Japan
This is Iron Heart’s over-spec’d answer to the Dickes-style work pant. The fit, while generous, maintains a slim silhouette with a slight taper throughout. A medium rise dials up the comfort and brings added ease of movement. The Japanese cotton chino cloth is exceptionally soft and breathable despite its 12oz weight. All of which makes for an excellent, all-occasion summer trouser. Built to Iron Heart’s famously exacting standards. Finished with a zipper fly and hook closure.
Carlo wears 31w chinos. He is 185 cm tall and weighs 78 kg / 6 ft 1" and 172 lbs.
Important: The best way to determine the size you need is to measure a similar item you already own and compare with the actual sizing as per the table below. Do not go by tagsize alone. Please note: These chinos are made from sanforized fabric. Shrinkage is minimal.
Button up the jean. Lay flat with the top waist band evenly flat on the back waist band. Measure from one side to the other keeping the jean flat & double the measurement.
Stage 2: The hip
Measure 3 inches or 7.5cm from the crotch stitch. Measure from side to side flat across the jean at this point.
Stage 3: Front rise
Lay flat and measure from crotch seam to top of jean with top button fastened
Stage 4: Back rise
Measure from crotch seam to top of the back of the jean.
Stage 5: Thigh
Lay flat and measure from crotch across to outside of leg.
Stage 6: Knee
Lay flat and measure 13” or 33cm from crotch down inside seam of jeans From here measure from one side of the jean to the other.
Stage 7: hem width/leg opening
With the jean flat measure from one side of the leg opening to the other. NB with very heavy denim 18oz and above measure the entire circumference of the exterior of the hem using a measuring tape and divide by 2 for a more exact figure.
Stage 8: Inseam/inside leg
Lay the jean flat with the inseam at the centre. Following the inside seam measure from the crotch to the end of the leg.
Stage 1: Chest
Measure from pit to pit and double the reading.
Stage 2: Shoulder
Measure across the top from one shoulder seam to the other.
Stage 3: Waist We measure the narrowest part of the garment outer seam to outer seam between the pit and the opening. If, however, the shirt has gussets, the waist will correspond to the the opening measurement.
Stage 4: Opening Here we take a cross measurement from seam to seam at the bottom of the shirt. Stage 5: Length Measure from the top of the shoulder by the collar to the bottom of the garment. Stage 6: Sleeve Measure from the top of shoulder seam to the cuff’s edge.
FREE European delivery on orders over €200.
Standard delivery is €30 for European orders under €200.
