Iron Heart’s IHJ-123 Work Jacket is made from a 14oz indigo broken twill selvedge denim that’s been sulphur overdyed black.
FABRIC: 14oz, 100% cotton selvedge denim
COLOUR: Indigo overdyed black
METHOD: Sanforized & overdyed
-Broken twill denim
-Garment overdyed with black sulphur dye
-Selvedge cut placket
-Two copper snap closure chest pockets
-Cotton twill lined handwarmer pockets
-Iron Heart copper snap waist cinches
-Two-way YKK zipper
-Adjustable snap fastened cuffs
-Single and double needle-stitch construction
ORIGIN: Made in Japan
Iron Heart take a 14oz, broken twill selvedge and overdye it black for this iteration of their Work Jacket. The dyeing process retains the denim’s indigo blues but imparts some darker hues upon the fabric too. It also creates a subtly worn-in look about the jacket, with a few initial lighter tones around the seams and stitching. Broken twill denim was introduced by Wrangler in the mid-60s. It uses an alternating left-hand twill/right-hand twill weave rather than committing to just the one. Historically, this prevented the legs of your jeans from twisting when washed. Broken twill denim is known for its distinctive, zig-zag weave – a feature that will really shine through when this work jacket begins to fade. Finished with handwarmer pockets, a main two-way zip, and additional copper snap hardware at the chest pockets, cuffs, and side cinches.
Elliot wears a size Large jacket. He is 185cm tall and weighs 74kg / 6ft 1" and 163 lbs
Important: The best way to determine the size you need is to measure a similar item you already own and compare with the actual sizing as per the table below. Do not go by tagsize alone.
FREE UK delivery on orders over £50.
FREE European delivery on orders over €200.
Standard delivery is €30 for European orders under €200
If you are not completely satisfied with your purchase, you can return it to us within 21 days for an exchange or refund.
For more information, please see our Returns & Exchanges page.
Stage 1: Chest
- Measure from pit to pit and double the reading.
Stage 2: Shoulder
>Measure across the top from one shoulder seam to the other.
Stage 3: Waist
We measure the narrowest part of the garment outer seam to outer seam between the pit and the opening. If, however, the shirt has gussets, the waist will correspond to the the opening measurement.
Stage 4: Opening
Here we take a cross measurement from seam to seam at the bottom of the shirt.
Stage 5: Length
Measure from the top of the shoulder by the collar to the bottom of the garment.
Stage 6: Sleeve
Measure from the top of shoulder seam to the cuff’s edge.